湿式高效除尘脱硫装置的试验研究

本文介绍了一种高效除尘脱硫装置三相流化床的性能和原理，并对三相流化床除尘脱硫工业中试系统的试验结果进行了分析。试验表明三相流化床除尘效率可达９５６脱硫效率达７０％，运行安全可靠。     

低耗高效城镇污水处理研发新进展——以厌氧生物处理为核心技术的城镇污水处理成套工艺中试研究

介绍以厌氧生物为核心技术的城镇污水处理成套工艺中试研究。HABR处理城镇污水 ,容积负荷控制在1～ 2kg m3·d,CODCr去除率可达 70 %～ 80 % ,出水CODCr和SS的浓度可达到污水综合排放标准的二级标准 ,经后续好氧处理后 ,出水CODCr和SS的浓度可达一级排放标准。试验结果表明 ,以厌氧生物为核心技术、好氧生物为后续处理的成套工艺 ,具有低耗高效、管理简便的特点 ,适合于我国城镇污水处理。试验获取的技术参数可作为工程设计的依据。     

从内蒙古自治区农村牧区居民环境教育试点项目探索农村牧区环境教育的方法

本文通过选定对内蒙古自治区农村牧区具有典型代表性的试验对象 ,全方位开展全民性环保意识的普及教育 ,已在试验区内收到显著的效果 ,从而对进行农村牧区居民环境教育的方式方法进行了有益的探索 ,对全国少数民族、边远地区环境教育工作也具有示范效益     

Remove cooking fume using catalytic combustion over Pt/La-Al2O3

Five monolithic catalysts with low noble metal content were prepared by irnmerge method （Pt/γ=Al2O3, Pt/La-Al2O3, Pt/YSZ-AI203, Pt＋Pd/La-Al2O3 and Pd/La-Al2O3） and their activity measurements were carried out in a conventional fixed-bed flow reactor. The results show that La-Al2O3 can promote activity of the prepared catalysts and can decrease the complete conversion temperature of cooking fume. The Pt/La-Al2O3 catalyst has the highest activity and can be applied in wide range of gas hourly space velocity （GHSV）. Some characterizations （XRD, TPR） were carried out with the objective to explain differences in catalytic behaviors. The prepared catalyst showed a great potential for application.     

HLA-A,B,C,DR typing and 17-OHP determination for second trimester prenatal diagnosis of 21-hydroxylase deficient CAH

In 18 families at risk for the HLA-linked, 21-hydroxylase deficient form of autosomal recessive congenital adrenal hyperplasia (CAH), prenatal diagnosis (PD) was performed using two methods: (1) HLA-A,B,C typing and in the latter 11 cases also DR typing of cultured amniotic fluid cells (AFC) using the standard microcytotoxicity assay, and (2) measurement of second trimester amniotic fluid 17-hydroxyprogesterone (17-OHP) concentration using gel chromatography and radioimmunoassay. The accuracy of the prenatal predictions was confirmed by postnatal HLA typing of umbilical cord blood lymphocytes and by clinical evaluation. In 16/18 families, both HLA typing of AFC and 17-OHP measurements proved informative for PD. The predictions of both methods were concordant in 14/16 families (88 per cent). In ten of these families, a normal fetus was predicted, and in four, an affected fetus; all pregnancies were carried to term and all predictions were confirmed postnatally. In 2/16 cases (12 per cent), however, the predictions were discordant: the prenatal HLA typing indicated an affected fetus, whereas the 17-OHP values predicted a normal fetus. Both pregnancies were continued and two healthy boys were delivered. The discordance proved to be due to a ‘missed’ HLA antigen in one case and to serologically cross-reactive HLA antigens in the second. Finally, in 2/18 cases, prenatal assessment of fetal genotype had to rely on HLA typing alone as 17-OHP measurement was not performed in one family and in the second family the 17-OHP values obtained were not informative due to inadvertent continuation of hormone therapy to the date of amniocentesis. In both cases, the HLA typing data accurately predicted a normal fetus. In conclusion, a combination of HLA typing of cultured AFC and 17-OHP measurements of amniotic fluid permits accurate prenatal diagnosis of CAH in most cases (88 per cent). In addition, the supplementary use of HLA-DR typing of AFC as presented here for the first time proved helpful in families with HLA-A.B homozygosity due to parental sharing of antigens and can be informative for identifying HLA-B/21-OH recombinant haplotypes.     

Streptomyces sp. WJS-825产谷氨酰胺转胺酶发酵条件优化及中试

应用五因子二次正交旋转回归试验设计,建立了微生物谷氨酰胺转胺酶 (TG)发酵生产过程中以酶活力和菌体细胞生长量作为目标函数的数学模型,并以此模型对链霉菌 (Streptomycessp. )WJS-825菌株发酵生产TG的培养条件进行优化,确定了影响TG生产的主要因子及其最适取值为多价胨 2. 1%、可溶性淀粉 1. 5%、初始pH 7. 0及培养温度 30℃.以该优化工艺条件进行了 5L发酵罐小试和 200L发酵规模的中试生产.结果表明,在中试发酵生产中使用以豆饼粉部分替代多价胨的经济性发酵优化培养基,以及发酵过程中在线监控pH、溶氧系数等多项发酵调控参数,并分段控制pH、温度、通气量和搅拌转速以及进行适时的流加补充碳源,该菌株生长繁殖能力强、产酶效果好,TG活性达 3. 2u/mL,而且连续重复的中试发酵生产试验的TG产量均稳定在 3. 2u/mL以上. 图 2表 3参 15     

A Large-Eddy Simulation Study of the Convective Boundary Layer over Philadelphia during the 1999 Summer NE-OPS Campaign

This study presents a large-eddy simulation (LES) study of the convective boundary layer on August 1, 1999 over Philadelphia, PA during a summer ozone episode. The study is an evaluation of the Colorado State University's Regional Atmospheric Modeling System Version 4.3 (RAMS4.3) with the LES option using Northeast Oxidant and Particulate Study (NE-OPS) data. Simulations were performed with different imposed sensible heat fluxes at the ground surface. The model was initialized with the atmospheric sounding data collected at Philadelphia at 1230 UTC and model integrations continued till 2130 UTC. The resulting mean profiles of temperature and humidity obtained from the LES model were compared with atmospheric soundings, tethered balloon and aircraft data collected during the NE-OPS 1999 field campaign. Also the model-derived vertical profiles of virtual temperature were compared with NE-OPS Radio Acoustic Sounder System (RASS) data while the humidity profiles were compared with NE-OPS lidar data. The comparison of the radiosonde data with the LES model predictions suggests that the growth of the mixing layer is reasonably well simulated by the model. Overall, the agreement of temperature predictions of the LES model with the radiosonde observations is good. The model appears to underestimate humidity values for the case of higher imposed sensible heat flux. However, the humidity values in the mixing layer agree quite well with radiosonde observations for the case of lower imposed sensible heat flux. The model-predicted temperature and humidity profiles are in reasonable agreement with the tethered balloon data except for some small overestimation of temperature at lower layers and some underestimation of humidity values. However, the humidity profiles as simulated by the model agree quite well with the tethered balloon data for the case of lower imposed sensible heat flux. The model-predicted virtual temperature profile is also in better agreement with RASS data for the case of lower imposed sensible heat flux. The model-predicted temperature profile further agrees quite well with aircraft data for the case of lower imposed heat flux. However, the relative humidity values predicted by the model are lower compared with the aircraft data. The model-predicted humidity profiles are only in partial agreement with the lidar data. The results of this study suggest that the explicitly resolved energetic eddies seem to provide the correct forcing necessary to produce good agreement with observations for the case of an imposed sensible heat flux of 0.1 K m s^–1 at the surface.     

Water quality assessment at Ömerli Dam using remote sensing techniques

Water quality at Omerli Dam, which is a vital potable water resource of Istanbul City, Turkey was assessed using the first four bands of Landsat 7-ETM satellite data, acquired in May 2001 and water quality parameters, such as chlorophyll-a, suspended solid matter, secchi disk and total phosphate measured at several measurement stations at Omerli Dam during satellite image acquisition time and archived at the Marine Pollution and Ecotoxicology laboratory of the Marmara Research Center, where this study was carried out. Establishing a relationship between this data, and the pixel reflectance values in the satellite image, chlorophyll-a, suspended solid matter, secchi disk and total phosphate maps were produced for the Omerli Dam.     

Precision Measurements from Very-Large Scale Aerial Digital Imagery

Managers need measurements and resource managers need the length/width of a variety of items including that of animals, logs, streams, plant canopies, man-made objects, riparian habitat, vegetation patches and other things important in resource monitoring and land inspection. These types of measurements can now be easily and accurately obtained from very large scale aerial (VLSA) imagery having spatial resolutions as fine as 1 millimeter per pixel by using the three new software programs described here. VLSA images have small fields of view and are used for intermittent sampling across extensive landscapes. Pixel-coverage among images is influenced by small changes in airplane altitude above ground level (AGL) and orientation relative to the ground, as well as by changes in topography. These factors affect the object-to-camera distance used for image-resolution calculations. ‘ImageMeasurement’ offers a user-friendly interface for accounting for pixel-coverage variation among images by utilizing a database. ‘LaserLOG’ records and displays airplane altitude AGL measured from a high frequency laser rangefinder, and displays the vertical velocity. ‘Merge’ sorts through large amounts of data generated by LaserLOG and matches precise airplane altitudes with camera trigger times for input to the ImageMeasurement database. We discuss application of these tools, including error estimates. We found measurements from aerial images (collection resolution: 5–26 mm/pixel as projected on the ground) using ImageMeasurement, LaserLOG, and Merge, were accurate to centimeters with an error less than 10%. We recommend these software packages as a means for expanding the utility of aerial image data.     

Pilot investigations of surface parts of three closed landfills and factors affecting them

Aftercare of closed sanitary landfills in a major environmentalproblem. Rehabilitation of the landfill with vegetation and reducing leachate production are two issues that must be dealt.For this reason, Finnish Environment Institute has conducted several projects on closed landfills. This research aims atdetermining the physical and chemical properties of the soils atthree closed landfills in Helsinki, Finland. Research was conducted to understand the impact by studying the following properties: Chemical, nutrient metal, gamma and radon analysis of surface soils of three closed landfills in Helsinki area.